Crystal Night Light Dig Kit – Excavate 6 Crystals & Build a USB Display (Ages 6+)

Brand:
SKU: 10702008

Original price was: $19.99.Current price is: $16.99.

- +
  • Excavate Six Named Crystals: Uncover amethyst, crystal quartz, smoky quartz, rose quartz, citrine, and strawberry quartz from one digging block.
  • Digging Tools Included: Use the supplied chisel and brush to loosen the block and clean each stone.
  • Build the Lighted Display: Arrange the crystals on the wooden base with the adhesive dots and clear plastic sheet, then add stickers.
  • USB LED Cable: The included light strip has an inline on/off button and connects to a USB power source. A wall adapter is not listed in the box contents.
  • Age & Safety: Recommended for ages 6+. Choking hazard—small parts; not for children under 3 years.

Share:

Product information

Product Dimensions

6.69 × 8.46 × 1.57 inches

Recommended Age
6 years and up
PACK
24pcs/ctn, 0.041m³
Outer Carton Dimensions
17.52 × 13.98 × 10.31 inches

2025 CATALOG AVAILABLE

Dig, arrange, and switch on · SKU 10702008

Excavate six crystals. Turn them into a lighted display.

Dig the stones out of one block, clean them, and arrange them on the wooden base. Add the LED strip, clear panel, and stickers, connect the USB cable, and use the inline button to turn the display on or off.

6 named crystals
Chisel + brush
USB LED light base
Recommended for ages 6+
Crystal Night Light Dig Kit with excavation block, six crystals, tools, USB LED base, stickers, and retail box

One project with three clear stages

Dig the stones, build the base, then make it glow.

The activity does not stop when the excavation block is empty. Your child cleans the six stones, follows the illustrated guide, arranges the display, and switches on the finished USB light.

6Named crystals inside the block
2Hand tools for digging and brushing
USBLED cable with inline on/off button
6+Recommended age

Inside the box

The pieces for excavation and the finished light are included together.

The product image lists the digging block, chisel, brush, wooden base, USB LED cable, adhesive dots, clear plastic sheet, sticker sheet, and illustrated introduction guide.

1 block with 6 crystals

All six named stones are embedded in the single excavation block.

1 chisel + 1 brush

Use the chisel to loosen the material and the brush to clean exposed surfaces.

1 wooden light base

The top groove holds the crystals and clear plastic panel.

1 USB cable with LED strip

The cable includes an inline on/off button.

Adhesive dots, clear plastic sheet, and stickers

Secure and decorate the display with the supplied craft pieces.

1 illustrated introduction guide

Follow the printed excavation, assembly, and crystal reference instructions.

Crystal Night Light Dig Kit contents: block, six crystals, chisel, brush, adhesive dots, wooden base, USB LED cable, sticker sheet, clear plastic sheet, and guide

Six stones to uncover

Match every cleaned crystal to its name in the guide.

The kit identifies each stone by name. Compare color and translucency after brushing away the excavation material.

Amethyst

Purple quartz shown at the left side of the display.

Crystal Quartz

The clear to milky stone in the set.

Smoky Quartz

Brown translucent quartz shown at the center.

Rose Quartz

The pale pink rounded stone.

Citrine

Yellow quartz shown near the right side of the base.

Strawberry Quartz

Pink stone with visible red speckling.

Crystal being uncovered from the excavation block with the included chisel

Excavation stage

Work slowly around each crystal.

The six stones share one block. When a smooth surface appears, reduce pressure and remove the surrounding material in small pieces.

01
Prepare the table

Place the block on a tray, paper, or washable mat before digging.

02
Loosen the outer layer

Scrape with the chisel a little at a time instead of breaking the whole block apart.

03
Brush exposed surfaces

Clear loose material so you can see where the stone ends and the block begins.

04
Clean all six stones

Set every recovered crystal aside before moving to the display stage.

Assembly stage

Arrange the crystals above the LED strip.

Use the wooden base as the frame. Fit the LED strip and clear panel as shown in the guide, then use the adhesive dots to hold the cleaned stones in place.

Check the base and cable

Make sure the LED strip and wire sit in the positions shown in the guide.

Add the clear panel

Slide the plastic sheet into the wooden groove before final decoration.

Test the arrangement

Place the six stones along the lit edge and adjust the spacing before securing them.

Apply the adhesive dots

Use the supplied dots to keep the crystals in their chosen positions.

Six named crystals arranged on the wooden USB LED night light base with decorative stickers
Illustrated Crystal Night Light guide showing the six stones, assembly steps, and finished USB display

Use the printed guide

One sheet covers the dig, crystal names, and light assembly.

Keep the guide beside the activity. It shows how to recover the crystals, position the LED strip and clear panel, arrange the stones, decorate the base, and connect the USB cable.

Identify the stones

Use the pictures and names rather than color alone.

Follow the base diagram

Check the orientation of the LED strip and wooden groove before securing anything.

Decorate last

Add stickers after the crystals and panel are in their final positions.

Keep the guide

Save it as a reference for the six crystal names.

Power and placement

Connect the cable only after the display is assembled.

The included cable ends in a standard USB plug and has an inline on/off button. Connect it to a compatible USB power source. A wall adapter is not shown or listed with the kit.

USB-powered LED strip

No battery compartment is shown in the product images.

Inline on/off button

Use the button on the cable to control the light.

Dry indoor location

Keep the cable, USB connection, and wooden base away from water.

Stable surface

Set the finished display where the cable will not be pulled or tripped over.

Finished Crystal Night Light glowing beside two children in a dark indoor setting
Adult and child arranging recovered crystals on the Crystal Night Light base

For parents

What happens between opening the box and switching on the light.

Your child first digs and brushes, then slows down to identify the stones and assemble the base. The finished light gives the six recovered crystals a clear place to stay.

Expect loose material

A tray or sheet of paper makes cleanup faster.

Help with the cable

An adult can check the LED strip, USB connection, and cable placement.

Let the layout change

The six stones can be compared and rearranged before the adhesive dots are applied.

Use the display afterward

The completed base keeps the crystals together instead of returning them to the box.

Age, safety, and product record

Check the package details before starting.

The box is marked for ages 6 and up and carries a choking-hazard warning for small parts. It states that the kit is not for children under 3 years.

Brand

Eduman

SKU

10702008

Product dimensions

6.69 × 8.46 × 1.57 inches

Recommended age

6 years and up

Pack

24 pcs/ctn, 0.041 m³

Outer carton dimensions

17.52 × 13.98 × 10.31 inches

Crystal Night Light retail package marked ages 6 plus with a small-parts choking hazard warning

Choose a different dig-and-keep project

More ways to uncover and use what you find.

Choose more loose specimens, a smaller planet dig, or a jewelry-making finish instead of a light.

Crystal Mining Kit with excavation block, real gemstones, crystals, minerals, tools, and storage pieces
More specimens

Crystal Mining Kit

Choose this when the main goal is digging and collecting a larger mix of loose stones.

View Product

Planet Gemstone Dig Kit with round excavation block, four natural minerals, one acrylic stone, and tools
Shorter activity

Planet Gemstone Dig Kit

Open one planet block and uncover five pieces for a smaller space-themed dig.

View Product

Unicorn Dig Kit with excavation pieces, charms, bracelet, necklace, ring, and tools
Make after digging

Unicorn Jewelry Dig Kit

Dig out charms, then use them to make wearable pieces instead of a lighted display.

View Product

Questions and answers

What to confirm before digging and assembly.

Which crystals are inside the block?

The kit identifies six stones: amethyst, crystal quartz, smoky quartz, rose quartz, citrine, and strawberry quartz.

Are the chisel and brush included?

Yes. The box contains one chisel and one brush for the excavation stage.

How is the finished light powered?

The included LED cable has a standard USB plug and an inline on/off button. Connect it to a compatible USB power source. A wall adapter is not listed in the box contents.

Can we rearrange the crystals?

Yes. Test the spacing on the wooden base before applying the supplied adhesive dots. Once the stones are secured, later changes may be less convenient.

What are the clear plastic sheet and stickers for?

The clear sheet fits into the wooden base as part of the display. The sticker sheet lets your child decorate the panel and base after the main assembly is complete.

What age is the Crystal Night Light Dig Kit for?

The product record and retail box recommend the kit for ages 6 and up. The package warns of small parts and states that it is not for children under 3 years.

Product and wholesale enquiries

Need stock, carton, or ordering information?

Use the ordering guide or contact us with SKU 10702008.